150mm Mold Crystallisation Assembly For Continuous Casting Machine

150mm Continuous Casting Machine Mold Crystallisation Assembly

Product introduction

Mold assembly is the key part of continuous casting machine, its structure and performance directly affect the production and quality of continuous casting billet.

Mold assembly should have the following characteristics: simple structure, easy to disassemble and adjust, easy to manufacture; It should have good structural rigidity and be light in weight so as to have a small inertial force during vibration.

1,The square billet and rectangular billet are crystallized

The square billet and rectangular billet mould assembly mainly consists of the following parts: mould copper pipe, outer water jacket, diversion water jacket, upper and lower sealing flanges, various sealing rings, foot roller device, foot roller spray device. The core part is the crystallizer copper tube, and the other parts are assembled around the copper tube.

The mould assembly should have the following characteristics: simple structure, easy to disassemble and adjust, easy to process and manufacture; To have a good structural rigidity, and the weight should be light, so that the vibration has a small inertia force.

Mold assembly is the key component of continuous casting machine. Its structure and properties directly affect the production and quality of continuous casting billet. All enterprises are actively exploring continuous casting machine according to their actual use, and optimizing the structural assembly of each part of the mold to meet the needs of continuous casting production.

2,Round mould assembly

The round billet mould assembly is mainly composed of the following parts: mould copper pipe, outer water jacket, diversion water jacket, upper and lower sealing flange, various sealing rings, foot roller device, foot roller spray device. Like the square billet and rectangular billet, the core component of the round billet mould assembly is the mould copper tube, and other components are assembled around the copper tube. The key to the assembly of round mould is to prevent the copper tube from rotating and to ensure the correct positioning of the copper tube along the inner and outer arc direction. The crystallizer assembly shall be tested by water pressure with the test pressure being 1.2-1.5 times of the working pressure and kept for 30min without leakage.

 Parameter 

Packaging & Delivery

Export wooden case packing

Port:TIANJIN, QINGDAO, SHANGHAI,