Silica brick high temperature resistance Refractory Materials Iron and steel smelting
Firebrick is called firebrick. Refractory material fired from refractory clay or other refractory materials. Light yellow or brown. Mainly used for building smelting furnace, can withstand 1,580 ℃ - 1,770 ℃ high temperature. Also called firebrick. Refractory material of definite shape and size. According to the preparation process, it can be divided into fired brick, non-fired brick, fused brick (fused cast brick), fire-resistant and heat-insulating brick; Can divide by shape and dimension standard brick, common brick, special unusual brick to wait. It can be used as high temperature building materials and structural materials for building kilns and various thermal equipment, and can withstand various physical and chemical changes and mechanical action at high temperature. Such as refractory clay brick, high alumina brick, silicon brick, magnesia brick and so on.
1, chemical composition: the main composition determines the quality and characteristics of the refractory
2, volume density: unit volume weight, high density, indicating good density, strength may be high, but the thermal conductivity may be large.
3, apparent porosity: no specific requirements, but as a manufacturer must strictly control the apparent porosity.
4, load softening temperature: also known as high temperature load deformation temperature, this parameter is very important, marking the high temperature resistance of the material
5, thermal shock resistance: resistance to rapid temperature changes without being damaged
6, compressive strength: withstand (room temperature) the maximum pressure capacity
7, flexural strength: the ability to withstand shear pressure
8. Linear change rate: also called refiring line change or residual line change, refers to the change of volume expansion and contraction in the same temperature change every time. If each expansion and contraction is the same, we define such linear change rate as 0.
Silica brick refers to firebrick containing more than 293% SIO, is the main variety of acid firebrick. It is mainly used for laying coke ovens, as well as for vaults and other load-bearing parts of thermal furnaces of various glass, ceramic, carbon calcining furnace and refractory brick. It is also used in high-temperature load-bearing parts of hot blast stoves, but it is not suitable for use in thermal equipment with large temperature fluctuations below 600℃.